Van Der Stahl PTT-100 V Operating Instructions Manual page 3

Simple peel tensile tester with visual inspection unit
Hide thumbs Also See for PTT-100 V:
Table of Contents

Advertisement

Foreword
Thank you for purchasing the simple peel tensile tester PTT-100V.
Please read all of the safety and operating instructions before operating this machine. Periodic
maintenance and proper operation are necessary to ensure safety when using PTT-100V.
Keep this manual on hand when operating the PTT-100V.
As a result of research to further improve the PTT-100V, some details in the operating instructions
may differ from your actual machine. For operating problems or product information, please
contact Van der Stahl Scientific.
About the warning labels
The following marks are used in this manual to easily identify the conditions of risks, damages,
or some tips for the optimal use of your unit.
・・ Minor injuries or damages to the unit may occur when the instruction is
Caution
ignored.
・・ Severe injuries or fatal accidents may occur when the instruction is
Warning
ignored.
・・ Critical injuries or fatal accidents will almost certainly occur when the
Danger
instruction is ignored.
・・ Important Notes and Restrictions - Read the directions in order to avoid
 Attention
misuse of the unit.
・・ Great Tips and References when using the unit - Highly recommend
TIPS
reading through the information.
This manual is designed to cover machines of various voltages and
plug configurations
Before using, always verify the voltage specification of your particular unit and operate it at the
correct voltages. Please note the following.
1
The voltage specification of your unit is listed on the label which displays the serial
number.
This label can be found on the machine body.
2
Please confirm the plug configuration on your specific unit. The explanations and
illustrations in this operator's manual utilize the plug configurations most common in
Japan.
Warning
Voltages and plug configurations differ according to various worldwide specifications.
Always verify those of your particular unit before beginning operation. Connecting the
power cord to an outlet of a different specification is extremely hazardous.
100V
200V
15A以下
20A
100V
200V
20A
30A
PTT-100V Operating Instructions Ver.4.03E
100V
20A、30A
3

Advertisement

Table of Contents
loading

Table of Contents