Perform Peel Tensile Testing With Ptt - Van Der Stahl PTT-100 V Operating Instructions Manual

PTT-100V Operating Instructions Ver.4.03E

7-1-2 Perform peel tensile testing with PTT

Please prepare for one sealed sterilized bag. Cut
1
it a specimen as specified in ASTM 88.
By using a cutting template, which
TIPS
is included in the accessories, you
can easily cut the film in the size of
1 inch width.
Caution
To cut the specimen, you need to
use a box cutter. Be careful not to
cut yourself.
How to cut a specimen
Cut a specimen as specified in ASTM 88.
By using a cutting template, you can cut the film in the
size of 1 inch width.
Prepare for a film-cutting template, which is
included in the accessories.
Place a film-cutting template on the sealed
sterilized bag. When the PEEL ORG setting is
10mm (0.4 inches), cut the film using a
template for 10mm. Likewise, when the PEEL
ORG setting is 25mm (1 inch), cut the film
using a template for 25mm. Please refer "The
size of specimens" below for the detailed sizes.
The size of specimens
28
When the PEEL ORG setting is 25mm (1")
When the PEEL ORG setting is 10mm (0.4")
25mm
Sealing
surface
45mm
PEEL ORG setting
25mm (1")
Sealing surface
Sealing surface
Sterilized bag
Sealing surface
25mm
35mm
PEEL ORG setting
10mm (0.4")