Changing Operator Name; Setting Operator Password - Van Der Stahl PTT-100 V Operating Instructions Manual

6-5-1-6 Changing operator name

1 Press the arrow button so the letter indicated in
the right illustration flashes.
2 Use arrow buttons and compose the desired
operator name, using alphabets (A-Z) and numeric
values (0-9).
3 Press the button to move the selected letter to
the next position. Input the name consisting of
eight characters.
<How to Input the Letters>
: Feed the displayed letter in the opposite direction indicated
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ-/_
e.g.) When the letter "T" is selected:
Pressing will change the displayed letter to U.
Pressing will change the displayed letter to S.

6-5-1-7 Setting operator password

Press the arrow button so the letter indicated in
1
the right illustration flashes.
2 Press the arrow buttons to input a six-digit
password using a total of 6 numbers. Press
button to select the next letter.
Press button when you have completed the
3
input.
TIPS Only numbers may be used for registering
as a password.
Important! Note:
When registering the Administrator password,
be sure to note it and keep it in a safe place.
If you forget your password, you may not be
able to operate the machine.
Van der Stahl cannot recognize or manage
passwords that customers have set.
PTT-100V Operating Instructions Ver.4.03E
1 : 1 : <OPERAT01>
<000001>
indicates the selected letter that flashes.
1 : 1 : <CHARLIE1>
<000001>
1 : 1 : <CHARLIE1>
<000001>
indicates the selected letter that flashes.
1 : 1 : <CHARLIE1>
<123456>
17