Menu 11> Viu Brightness Setting; Menu 12> Select The Inspection Mode - Van Der Stahl PTT-100 V Operating Instructions Manual

6-5-9 <MENU 11> VIU brightness setting
The brightness of the VIU lights is adjustable in 5 stages.
Access the menu in the right procedure.
1
2 The display now shows the right screen.
Use arrow buttons to switch the level of
brightness from 1 to 5.
Select and press the
setting.
6-5-10 <MENU 12> Select the inspection mode
You can select the desired inspection mode 1 or 2 with this menu.
INSPECTION 1: VIU inspection and PTT test can be performed separately.
INSPECTION 2: PTT cannot be used without the VIU inspection
Access the menu in the right procedure.
1
The display now shows the right screen.
2
Use arrow buttons to select and press the
button to save the setting.
TIPS See "7 Start testing" on page 26 for the
detailed operation procedures with each
inspection mode.
button to save the
PTT-100V Operating Instructions Ver.4.03E
MENU 11
BRIGHTNESS
BRIGHTNESS
LEVEL 1
MENU 12
INSPECTION MODE
INSPECTION
1
BRIGHTNESS
LEVEL 5
INSPECTION
2
21