Finnleo NorthStar Indoor Series Owner's Manual page 5

4. Place the back wall panel on the floor and butt it to the right wall panel.
5. Secure the back wall to the right wall with three 3" Torq screws (provided). Install
one screw on the top of the wall, one in the middle, and one on the bottom. Ensure
the tongue and groove wall boards are tight together at the interior corner of the
sauna and the corner is flush on the outside edge when screws are installed.
6. Install the left wall panel. Repeat step 5 between left wall and back wall.
7. Install the front wall panel. Repeat step 5 on both corners of the front wall.
71-0163
Rev. 01
Page 5 4215-138
09/07/2021