Interior Installation - Finnleo NorthStar Indoor Series Owner's Manual

INTERIOR INSTALLATION

49. Install door handle so the handle with the predrilled holes is inside the room. Secure
handle with two screws provided within the handle package and cover screw heads with
wooden buttons.
50. Place upper bench on the upper bench supports. Rest the bench upward for
easier installation of the lower bench.
51. Place lower bench on the lower bench supports. Lower upper bench into
place.
52. Secure upper bench with two 3" screws through the framework into the
backwall and one 3" screw into right and left sidewalls.
Note: Do not secure the lower bench, as it is designed to slide back out of the
way for ease of cleaning.
53. Place duckboard (floorboard) on floor in front of the lower bench.
54. Connect the wires from the back of the backrest to the wires from the back wall. Install the backrest
to the back wall through the predrilled holes (standard height is 20" from top of bench to top of
backrest). Install wooden buttons over screws.
71-0163
Rev. 01
Page 14 4215-138
09/07/2021