The battery charger parameters are individually adjustable. Detailed information
can be found in the "Configuration mode" section.
Menu selection
Switch to the menu selection from standard mode as follows:
1
Switch to the menu selection from the other modes as follows:
1
Open the desired mode:
2
3
Statistics mode
1
Press and hold the "Menu" button for approx. 5 seconds.
Press the "Menu" button briefly.
Use the "Up/Down" buttons to select the symbol for the desired mode.
-
e.g. the battery symbol for standard mode
Press the "Pause/Start" button to confirm the "check mark" symbol.
Use the "Up/Down" buttons to switch between page 1/2 and page 2/2.
In standard mode, the display shows
the battery charger parameters:
-
Type of battery (e.g., Pb-WET)
-
Charging characteristic (e.g., IUI)
-
Nominal voltage (e.g., 48 V)
-
Capacity (e.g., 300 Ah)
-
Weekday, date and time
In statistics mode, horizontal bars
visualize the frequency of the following
operating states of the device:
-
Idle
-
Charging
-
Floatingcharge
-
Cooldown
-
Error
Page 2/2 shows the following values:
-
Total number of charges
("Charges").
-
Total Ah delivered.
-
Average Ah delivered per charge
("Charge").
-
Total energy consumed (kWh).
-
Average energy consumed (kWh)
per charge ("Charge").
35