Standard mode
Once the mains plug has been connected to the electrical mains supply, the dis-
play will automatically operate in standard mode.
The charger parameters can be set individually. More information can be found in
the "Configuration mode" section.
Menu selection
Change from standard mode to the menu selection as follows:
1
Change from all other modes to the menu selection as follows:
1
To select the desired mode:
2
3
30
Press and hold the "Menu" key for approx. 5 seconds.
Briefly press the "Menu" key.
Use the "Up/Down" keys to select the symbol for the desired mode.
-
e.g. the battery symbol for standard mode
Use the "Pause/Start" key to confirm the "Tick" symbol.
In standard mode, the display shows
the following charger parameters:
-
Type of battery (e.g. Pb-WET)
-
Charging characteristic (e.g. IUI)
-
Nominal voltage (e.g. 48 V)
-
Capacity (e.g. 300 Ah)
-
Day of the week, date and time