Table of Contents
Advertisement
In standard mode, the display shows the following charger parameters:
-
-
-
-
-
The charger parameters can be set individually. More information can be found in the
"Configuration mode" section.
Menu selection
Change from standard mode to the menu selection as follows:
1
Change from all other modes to the menu selection as follows:
1
To select the desired mode:
2
3
Statistics mode
Type of battery (Li-Ion)
Charging characteristic, Fronius Li-Ion (CAN)
Charger voltage range, alternates with the maximum output current, or only the battery
nominal voltage if a battery is connected
Connection status:
Not connected, or
Connected
Day of the week, date and time
Press and hold the "Menu" key for approx. 5 seconds.
Briefly press the "Menu" key.
Use the "Up/Down" keys to select the symbol for the desired mode.
-
e.g. the battery symbol for standard mode
Use the "Pause/Start" key to confirm the "Tick" symbol.
Use the "Up/Down" keys to toggle between page 1/2 and page 2/
1
2
In statistics mode, horizontal bars display
the frequency of the following device opera-
ting statuses:
-
Idle
-
Charging
-
Charge Finished
-
Cooldown
-
Error
Page 2/2 shows the following values:
-
Total number of charges
-
Total Ah output
-
Average Ah output per charge
-
Total energy consumed (kWh)
-
Average energy consumed (kWh) per
charge
31
Advertisement
Table of Contents
