Time Offset; Navigation Buttons; Call Log - Nortel 2004 User Manual

Mute
• While on a call, press
microphone is off.
• Press
• Use

Time offset

When your IP Phone 2004 is located in a different time zone from your system, the display shows
the system time not the local time. The Time Offset feature allows you to adjust the time that
appears on the display.
Before you begin, calculate the time difference, in hours, between the server time and local time.
To change the time that appears on your telephone display to local time:
Press Feature *510.
1
Press CHANGE.
2
3
Press * to switch between adding or subtracting time.
4 Using the dialpad, enter the number of hours between local time and system time.
Note: Press # to enter half hour increments.
Press OK.
5
Note: It may take up to one minute for the change to appear on the display.

Navigation buttons

Use the Navigation buttons to scroll through or make changes to your call log.
Press Feature 812.
1

Call log

Call Log displays use the following special characters:
1 (underline) identifies a new item
¯ identifies answered calls
§ identifies long distance calls
/ identifies that the information has been shortened
to turn the microphone off. The
again to turn the microphone on.
on handset, Handsfree or headset calls.
Features and buttons
button lights when the
IP Phone 2004 User Guide
11