Feature options area
When a feature is activated, or when you are on an active call, the display command line shows
you the action you must take to proceed.
For example: Pswd. This means you must enter your mailbox password.
The Feature options area shows the label for the
These button labels appear in capital letters directly above the Feature and display buttons, and to
the right of the
use.
About your programmable buttons
Your System Administrator assigns the six programmable buttons as line, intercom or memory
buttons. The label for each button appears on the display next to the button. For more information,
see your System Administrator.
Telephone setup
This section describes the IP Phone 2004 display features:
•
Display contrast
•
Language choice
•
Ring type
Note: For more information about the features available to your telephone and how to use them,
refer to the Telephone Feature Card.
Display contrast level
Adjust the contrast for the telephone display.
1
Feature
Press
DOWN
2
Press
OK
3
Press
to select a level.
Language choice
Select the Primary Language for the telephone display.
1
Press
Feature
1
Press
Feature
1
Feature
Press
1
Feature
Press
FEATURE
label on the display. These button labels vary depending on the feature in
*7.
UP
and
to view the levels.
*501. Select the Alternate Language for the telephone display.
*502. Select the Alternate Language 2 for the telephone display.
*503. Select the Alternate Language 3 for the telephone display.
*504. Select the Alternate Language 4 for the telephone display.
FEATURE
button and for the three display buttons.
IP Phone 2004 User Guide
Getting started
7