Presets (Memorized Routing Patterns) - Hall Technologies HSM-88-4K User Manual

1. To blank an output, hold the Output button for 3 seconds or until its led starts
blinking.
2. Press SET to apply the change. The blanked Output will be crossed on the front
panel LCD with an "X", indicating that it is blanked.
Example: Blanking output 1
You can also blank all the outputs that are connected to a particular input.
1. Hold the input for 3 seconds.
2. Press SET to apply the change. All the affected output ports and blanked

3.3 Presets (Memorized Routing Patterns)

The number of presets accessible from the front panel is the same as the total # of
input buttons. Each front panel input button can memorize a pattern. Therefore, you
can recall 8 presets.
3.3.1 Saving ongoing configuration as a Preset
1. To save ongoing configuration as a preset, hold PRE button for 3 seconds until it
blinks.
2. Select preset position by pressing an input button
3. Press SET to save the pattern as a Preset in that key position.
Example: Saving ongoing configuration as Preset #1
3.3.2 Recalling Presets
1. To recall a saved preset, press the PRE button.
2. Select the desired Preset # by pressing an input button.
3. Press SET to recall the preset.
Example: Saving preset #1 from the previous example
8
© Copyright 2018 Hall Technologies