Table of Contents
Advertisement
I
NTRODUCTION
6
Organic Removal Cartridge and the High Capacity
Cartridge for economical removal of both organic and
inorganic matter from most water supplies.
Dimensions
The Model D1 is 10 1/2" wide x 7 1/2" deep x 25 1/2"
high and has an operational weight of 26 Ibs.
The Model D2 is 16 3/4" wide x 7 1/2" deep x 25 1/2"
high and has an operational weight of 41 Ibs.
Deionization Cartridge Data
Barnstead High Purity Cartridge
Barnstead High Purity Cartridges are designed for use in
applications requiring extremely high resistivity and low
organic product water. Barnstead High Purity Cartridges
are manufactured using only the highest quality, nuclear
grade, mixed bed resins. The result is a deionization car-
tridge that will remove 790 grains* of dissolved solids,
most organics, and produce water with a resistivity
greater than 16 megohm-cm. This cartridge may be used
in any Barnstead MEGA-PURE® Deionization System,
but in the D1 and D2 we recommend that an external
resistivity monitor be used to take full advantage of the
High Purity Cartridge and its high resistivity capability.
Barnstead High Capacity Cartridge
Barnstead High Capacity Cartridges are designed for effi-
cient and economical removal of dissolved inorganic mat-
ter from most water supplies. The output from this car-
tridge may be used in most laboratory procedures or as
the input for a Barnstead MEGA-PURE® Water Still. This
cartridge is recommended for use in the Barnstead
MEGA-PURE® D1 or D2 Deionization Systems.
Approximate cartridge life (50K-ohm end point) can be
calculated by using 1530 grain capacity in the formula list-
ed below.
Barnstead Organic Removal Cartridge
Barnstead Organic Removal Cartridges are designed to
remove most organic impurities from water supplies. It will
remove free chlorine and most color,odor, products of
Advertisement
Table of Contents
