Table of Contents
Advertisement
S
A
ETUP AND
SSEMBLY
12
Deionizer with solenoid valve accessory -
Figure 4
1.
Unpack Part No. 440375 Solenoid Valve
Accessory Kit (ordered separately).
2.
Note the "IN" side and connect that side to your
water source.
3.
Install the 1/4" N.P.T. plastic fitting from the parts
box to the "OUT" side of the solenoid valve.
4.
Refer to Figure 6 and instructions and install
1/4" O.D. High Pressure tubing to plastic fitting
from step 3.
5.
Go to steps 4, 5 and 6 of DEIONIZER ONLY
SETUP.Deionizer to a Barnstead MEGA-PURE
Still - Figure 5
Advertisement
Table of Contents
