Cascading; Figure 16- Cascaded Unimux-Usbv-4O Usb Kvm Switches - Network Technologies NTI UNIMUX UNIMUX-USBV-4 Installation And User Manual

4/2-port usb kvm switch unimux series

Table of Contents

CASCADING

The UNIMUX-USBV-4O USB KVM switch can be expanded to access up to 128 CPUs by cascading multiple units together. As

many switches as there are CPU ports may be connected to a UNIMUX-USBV-4O USB KVM switch.

UNIMUX switches may be connected downstream (see Figs.16 and 17). The first switch in a cascaded system is referred to as

the "master", while all downstream switches are referred to as "slaves". The only additional hardware required to cascade

switches is a set of device and monitor cables for each "SLAVE UNIT" (see MATERIALS on page 1).

then be controlled by users using OSD commands with Command Mode.

Note: The UNIMUX 4 port USB KVM switch must have OSD installed to use cascading.

Note: Cascading is not an option in the UNIMUX-USBV-2 2 port USB KVM switch.

Single user and multi-user

All CPUs and switches can

Table of Contents

Unimux-usbv-2 Unimux-usbv-4/2