Table of Contents
Advertisement
Drystar 5301, Drystar 5302 | Advanced Operation (key-operator mode) | 57
4. Press the up/down arrow keys to select the desired save set file, followed
by the Confirm key.
The following confirmation screen is displayed:
5. Press the Confirm key (YES) to proceed with the selected file, or the
Escape key (NO) to quit the procedure without any changes.
If you press the Confirm key, the printer will restore the configuration
from the external USB flash drive on the internal media and the following
screens appear successively:
When the restoring of the save set file is finished, the printer will ask you
to remove the USB flash drive:
6. Remove the USB flash drive.
As soon as the USB flash drive has been removed, the following screen is
displayed (when necessary):
Related Links
Accessing the restore configuration menu
Restoring printer settings from the internal media
1. On the Restore configuration menu, press the Confirm key to select
'General'.
The following 'Restore Configuration' screen appears:
2. Press the up/down arrow keys to select the save set file from the internal
media (e.g. 'From 21/04/05 15:34') followed by the Confirm key to
restore the configuration settings of the printer from the internal media.
The following screen is displayed:
on page 55
2830F EN 20210520 0952
Advertisement
Table of Contents
