Table of Contents
Advertisement
40 | Drystar 5301, Drystar 5302 | Advanced Operation (key-operator mode)
4. The printer will continue with the 'Select for Modality' screen, allowing
you to change the Look-up table, the Interpolation and the maximum
density (Dmax) values manually.
<Modality name>
<Modality name>
<Modality name>
3 Dmax
3 Dmax
3 Dmax
5. In the 'Select for Modality' screen, press the Confirm key to select 'Look-up
table'
The 'Look-up table' screen is displayed:
<Modality name>
1*Linear
<Modality name>
<Modality name>
2 Kanamori
1*Linear
1*Linear
2 Kanamori
2 Kanamori
3 Kanamorilike (100)
3 Kanamorilike (100)
3 Kanamorilike (100)
6. Press the up/down key to select the desired look-up table.
7. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
In case Kanamorilike (100) is selected, you can change the Kanamorilike
value (the range is: 75-220, the default value = 100).
An additional screen for the Kanamorilike value is displayed:
<Modality name>
Enter the Kanamorilike value by means of the arrow keys. Press the
Confirm key to store the data, or the Escape key to quit the procedure
without any changes.
Related Links
Controlling the printer via a remote PC (with browser)
Accessing the Change settings menu
Data entry
Removing a modality
Adding a modality
Changing Image quality settings for a modality - Changing the
interpolation
1. On the Change settings menu, press the Down key four times, followed by
the Confirm key to select 'Image quality'.
The following screen will appear:
2 <Modality name>
3 <Modality name>
2830F EN 20210520 0952
modality new parameters can be assigned via the local
keypad.
<Modality name>
<Modality name>
on page 12
on page 34
on page 34
on page 80
on page 23
Advertisement
Table of Contents
