Network Only Save Configuration Procedure - AGFA Drystar 5301 Reference Manual

52 | Drystar 5301, Drystar 5302 | Advanced Operation (key-operator mode)

Network only save configuration procedure

1. On the Save configuration menu, press the Down key, followed by the
Confirm key to select 'Network only'.
The following screen appears:
2. Press the Confirm key to confirm the network name.
The network settings are temporary saved on the internal media.
When 100% is reached, the following 'Save network' screen is displayed
and the printer will ask you to insert a USB flash drive:
3. Insert a USB flash drive.
The printer saves the network settings on the external USB flash drive:
C <path><filename>
A <path><filename>
When the writing of the save set is finished, the printer will ask you to
remove the USB flash drive:
4. Remove the USB flash drive.
As soon as the USB flash drive has been removed, the following screen is
displayed:
2830F EN 20210520 0952
Note: A blank network name or a network name with
spacings is not allowed.