Table of Contents
Advertisement
10 | Drystar 5301, Drystar 5302 | Advanced Operation (key-operator mode)
Accessing the Key-operator menus
The Key-operator mode functions (i.e. the main menu level) can be accessed
by pressing the Key-operator key on the front panel.
After pressing the Key-operator key the main menu is displayed:
5 Restore config.
6 Calibration
7 Service Actions
8 Quality Control
9 Installation
You can scroll through the menu items by pressing the Down and Up keys and
select a menu item by pressing the Confirm key. The active keys are indicated
by their respective LEDs.
At any moment you can press the Escape key on the main menu level to exit
the Key-operator mode. If you press this key on a lower level menu you are
2830F EN 20210520 0952
Note: The two characters displayed in inverse video in the upper
right corner indicate the current menu item (e.g. 'KO' for main
Key-operator menu, 'QC' for Quality Control, etc.).
Visible
Reachable with Up/Down arrow keys
Note: When you try to enter the Key-operator mode during
printing, it will first finish the active print job(s):
Note: If certain mandatory site-specific data has not yet been
entered, the following screen is displayed when entering the
Key-operator mode.
Advertisement
Table of Contents
