Daikin MCB50YSAU Installation & Operation Manual page 12

Read First
Preparation Before Operation
2
Attaching the carbon filter
1.
Remove the carbon filter unit from the main
unit.
Hold the lever of the carbon filter unit and the grip,
and pull it out.
Lever
Grip
Carbon filter
unit
Bottom side
Hooks
2.
Remove the carbon filter from the bag.
• The carbon filter has no front or back.
Carbon filter
• Observe local waste separation rules when
disposing of the carbon filter bag and desiccant.
3
Insert the power supply plug into the power socket
• The basic sensitivity of the odor sensor will be determined by odor
levels in the first 1 minute (approx.) after the power supply plug is
inserted every time.
Insert the power supply plug when the air is clean (odor-free).
11
Top side
Bottom side
Fixed
parts
Wear gloves when
working.
(Dust from the carbon
filter may make your
hands dirty.)
WARNING
Be sure to stop the operation and remove the power supply
plug before installation. (Electric shock or injury may result)
3.
Turn the carbon filter unit over and attach
the carbon filter.
1 Set the carbon filter under the fixed parts (3 places).
2 While pushing the hooks up, set the carbon filter
under the 2 hooks.
Hooks
Securely attach the filter with the hooks.
4.
Install the carbon filter unit into the main unit.
• When starting operation, if a notification tone sounds
and the odor sensor lamp blinks, the carbon filter unit
and the carbon filter are not properly installed.
Re-install the carbon filter unit and the carbon filter.
Power socket
Carbon filter
Fixed parts
Push up the hooks on the
carbon filter unit.
Press until a catching
sound is heard
3 long
beeps
Power supply plug