Preparation Before Operation - Daikin MCB50YSAU Installation & Operation Manual

Preparation Before Operation

1
Positioning the unit in the room
Before setting up, remove
the tape on the bottom
which is securing the power
supply cord, then take out
the power supply cord.
Power supply cord
Tape (blue)
At least 40 inches
(100cm) away from
ceiling
At least 4 inches (10cm)
away from wall
At least 12 inches
(30cm) away from wall
Pointers for good positioning
• Choose a position from where airflow can reach all areas of the
room.
• Place on a stable surface. If the unit is placed on an unstable
surface, vibrations from the unit may be amplified.
• If interference from the power circuit inside the unit or cables
causes disturbance of TV screen images or the emission of
static noise from nearby radios or stereos, move the unit to at
least 7ft (2m) away from the device.
Keep cordless phones and radio-controlled clocks away from
the unit also.
Attention
• To avoid staining of walls, position the unit in accordance with
the positioning measurements in the illustration. However, note
that since this unit draws in dirty air, certain types of wall may
become stained even if the measurements are adhered to.
In such cases, be sure to maintain sufficient distance between
the unit and the wall.
• When used for a prolonged period in the same location, the
base of the unit and the floor and surrounding walls may
become stained as air is drawn into air inlets near the base of
At least 12 inches
the unit. Periodic cleaning is recommended.
(30cm) away from wall
Air flow
Read First
10