Vacuum Cleaner Assembling; Operation; Cleaning And Maintenance - Hyundai H-VCH15 Instruction Manual

6.

Manufacturing date is indicated on the unit and/or on packing as well as in accompanying
documents in the following format XX.XXXX where first two figures XX is the month of production,
and following four figures XXXX is the year of production.

The appliance should be used only with the power supply supplied with the appliance.

The instrument must be powered only by a safe, ultra-low voltage marked on the instrument.
CHARGING

The device can be used for rooms cleaning from dust and small debris.

Unpack the device and remover sticker from body

Vacuum cleaner is battery operated. To charge the battery, connect the adapter to the base and
plug the adapter into an outlet. The body of the vacuum cleaner will place it on the base.

The indicator pulses while charging and stops to flash once is charged. Battery charging time is 4-5
hours. Battery working time up to 40 minutes. If the indicator lights
the battery must be charged.

NOTE: Tube and turbo brush should be disassembled during the charging.

VACUUM CLEANER ASSEMBLING


Insert the tube to suction port of device and press down until click sound. Press a tube release
button to disconnect it from device.

Connect brush with lower part of tube and press down until it clicks. Vacuum cleaner can be used
with and without the tube, connecting the brush with device's body. The device with a tube is
used for basic cleaning. Handle vacuum cleaner without the tube is used for additional cleaning.

To connect brush with body insert it to suction port and press down until click sound. Press brush
release button to disconnect it.
ATTACHMENTS

Crevice nozzle for hard to reach places cleaning and furniture nozzle for curtains and furniture
cleaning are in the kit.

Motorized turbo brush for cleaning the hair and wool

To install one of the nozzles, insert it into the tube or suction hole until it locks.

The cleaning can be started after charging the vacuum cleaner and installing the attachments.

OPERATION


Press On/Off switch to activate the device, press it to change to high speed. During operation on I
speed, the indicator light («ECO-G/MAX-R») on the display will turn green. During operation on II
speed, the indicator light («ECO-G/MAX-R») on the display will turn red.
NOTE:

Empty the dust bowl after each cleaning.

Never use the vacuum cleaner without filters or with dirty or damaged filter. Otherwise, dust will
get the motor and can be a cause of the device damage.

Do not use the appliance with dust bowl full up to „MAX' mark. When the dust bowl is full, dirty
air clogs the filter of the vacuum cleaner, causing engine overheat and damage.

Do not use the device for cleaning construction debris (cement, whitewash, plastering, metal
chips and so on). Such particles can be a cause of engine failure.

Do not wash vacuum cleaners parts in dish washer and washing machine.

CLEANING AND MAINTENANCE


Switch off your vacuum cleaner.
up red during operation,