Table of Contents
Advertisement
Vacuum cleaner assembling
Always remove the plug from the power supply before fitting or removing accessories.
Fitting flexible hose
Insert the flexible hose into the air inlet and push down until it clicks.
Hose removing
To remove the flexible hose from the vacuum cleaner, press the release button situated on the flexible hose base then pull to remove it from the air inlet.
Fitting metal tube and accessories
Assemble the plastic tube from 2 pieces.
Insert a flexible hose into the plastic tube.
Fit a nozzle to the metal tube:
-
Universal floor brush is intended for cleaning bare floor and floor coverings.
-
Furniture/ Crevice nozzle is for cleaning sofa, curtain or dust on the decorating surfaces, corners and between cushions.
Instruction for use
Before using the appliance, unwind a sufficient length of the cord and insert the plug into the power supply. The yellow mark on the cord shows the ideal
cord length. Do not unwind the cord beyond the red mark.
On the upper part of the body of the unit is placed the knob with 2 functions: switch on/off the power , adjust the power level
Press this button to switch the unit on. To stop it press this button again.
With the same knob you can also adjust the vacuum cleaner power.
Turn the knob clockwise to increase the power, anticlockwise - to decrease it:
-
decrease power for cleaning curtains, books, furniture, etc.
-
increase power for cleaning bare floor.
You can adjust the air flow using the air flow regulator on the flexible hose.
On the back part of the upper body of the unit under the carrying handle is placed the cord rewinder knob
To rewind the cord, push the carrying handle so that it presses this knob. Guide the cord with hand to ensure that it does not whip causing damage.
Advantages of your vacuum cleaner
Your vacuum cleaner is equipped with 5 step filtration system:
- the constant cloth dust bag;
Downloaded From Vacuum-Manual.com Manuals
3
Advertisement
Table of Contents
