Table of Contents
Advertisement
Switching the LED Lighting On/Off
1. If needed, switch the LED lighting on, using the right ON/OFF switch, and
setting it to 'I' position.
A red mains control light in the switch will light up.
2. In order to switch the lighting on, set the LED lighting ON/OFF switch to 'O'
position.
Switching the Appliance Off
1. If the appliance is not to be used any more or is to be cleaned, press and hold
the ON/OFF button in the middle of the temperature controller pressed for at
least 3 seconds.
The appliance is being switched off.
The digital display shows '—'.
2. After use, disconnect the appliance from the mains power supply (pull the plug
out).
EN
6
Cleaning and Maintenance
6.1
Safety Instructions for Cleaning
•
Before cleaning, disconnect the appliance from the power supply.
•
Leave the appliance to cool down completely.
•
Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
•
Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
•
For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
18 / 24
Cleaning and Maintenance
700806
Advertisement
Table of Contents
