Introduction; Equipment; Technical Data - ESAB ESABMig 405 Instruction Manual

GB
3

INTRODUCTION

The ESABMig 405 and ESABMig 505 are step switched power sources designed for
MIG/MAG–welding together with wire feed units ESABFeed 30, ESABFeed 48
and the most of ESAB wire feeders.
The power units are fan–cooled and equipped with thermal overload protection.
The machines can be fitted with an instrument for display of current and voltage. It
incorporates a hold function and can be calibrated.
The machines can be fitted with a flow guard.
ESAB's accessories for the product can be found on page 203.
3.1

Equipment

The power source is supplied with:
S Return cable 5m with return clamp
S Shelf for gas cylinder
S Guide pin for wire feed unit
S Instruction manual
4

TECHNICAL DATA

Voltage
Permissible load
at100 % duty cycle
at 60 % duty cycle
at 50 % duty cycle
Setting range (DC)
Open circuit voltage
Open circuit power
with cooling unit
Efficiency at max current
Power factor at max current
Control voltage
Dimensions lxwxh
Weight
with cooling unit
Operating temperature
Enclosure class
Application classification
405,505e
ESABMig 405
400–415V, 3~50/60 Hz
280 A/28 V
365 A/32 V
400 A/34 V
50A/16,5V–400A/34V
17–45 V
360 W
600 W
71%
0,98
42 V, 50/60 Hz
812 x 552 x 925
144 kg
158 kg
o
–10 to +40 C
IP 23
– 58 –
230/400–415/500V 3~50 Hz
230/440–460 3~60Hz
280 A/28 V
365 A/32 V
400 A/34 V
50A/16,5V–400A/34V
17–45 V
360 W
600 W
71%
0,98
42 V, 50/60 Hz
812 x 552 x 925
145 kg
158 kg
o
–10 to +40 C
IP 23