Setting Network Ring Speed - 3Com CoreBuilder 5000 User Manual

Setting Network Ring
Speed
CB5000> set network token_ring token_ring_4 ring_speed 16mbps
Value set to 16 Mbps.
Setting Beacon Threshold
Enabling Static Ring Switching
Enabling Mismatch Resolution (Passive and Active Per-Module
Media Modules Only)
Moving Rings from Module-Level to Hub-Level
Setting Port Alert Filters
Enabling Speed Detect (Passive Module Only)
Setting Module Speed Threshold (Passive Module Only)
Use the SET NETWORK TOKEN_RING RING_SPEED command to set the
ring speed of a specified network. Any module, port, trunk, or
daughter card assigned to the network is automatically set to the speed
of the network.
The command sequence is:
SET NETWORK TOKEN_RING {network} RING_SPEED {4_MBP}
Where:
network = token_ring_1 to token_ring_10
isolated_1 {slot} - isolated _11 {slot}
The following command sets the ring speed for backplane network
token_ring_4 to 16 Mbps:
Configuring the Modules
{16_MBPS}
4-3