Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DMP Electronics 1135 Series
Summary of Contents for DMP Electronics 1135 Series
- Page 1 INSTALLATION AND PROGRAMMING GUIDE 1135 Series Wireless Siren...
- Page 2 GET STARTED The 1135 Series Wireless Siren provides up to 110 decibels of annunciation. It includes a wall tamper, a cover tamper, and a Survey LED. Multiple sirens can be activated simultaneously by the panel using the Trip with Panel Bell option. This option allows the siren to follow the panel bell output including the bell cutoff time.
- Page 3 Program the Panel To program the 1135 Series into the panel, select one of the following methods: Choose Method 1 to make the siren a non‑standard output that follows the panel bell or Method 2 to make the siren a standard output.
- Page 4 Holding the sides of the housing, press the siren onto the mounting surface. Place the jumper over both header pins to disable the wall tamper. Place the cover back onto the base, then reinsert and secure the two locking screws. 1135 Series Installation and Programming Guide | Digital Monitoring Products...
- Page 5 OUTPUTS ON/OFF—In the User Menu, select OUTPUTS ON/OFF. Enter the output number and choose ▶ ▶ Output follows zone condition—Program the output in ALARM ACTION and set the action to FOLLOW. When the transmitter zone restores, the output is turned off 1135 Series Installation and Programming Guide | Digital Monitoring Products...
- Page 6 4.5 L x 4.5 W x 1.25 H in (11.4 L x 11.4 W x 3.2 H cm) PATENTS ▶ U.S. Patent No. 7,239,236 CERTIFICATIONS ▶ FCC Part 15 ID: CCKPC0123R8 ▶ Industry Canada: 5251A‑PC0123R8 1135 Series Installation and Programming Guide | Digital Monitoring Products...
- Page 7 Underwriters Laboratory (UL) Listed ANSI/UL 1023 Household Burglar Alarm System Units ANSI/UL 1610 Central Station Burglar Alarm Units ANSI/UL 985 Household Fire Warning System FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the 1135 Series and is the answer not in the manual?
Questions and answers