Advertisement
Calibration in 3 steps
Step 1:
Lay the measuring module on its base or back next to the basic
unit and press the CAL-key again. (0) is blinking on the display.
Step 2:
Press CAL again. (121.9) is blinking on the display.
Step 3:
Lift to a height of 1.219 m and press CAL again. Hold steadily
during the process. Then (121.9) is shown on the display.
Step 1
ZipLevel Plus 30
Step 2
Step 3
1,219 m
GB
15
Advertisement
