Advertisement
REC
The ZipLevel can also be used for different calculations and shows an
average, minimum and maximum.
1) Press the REC-key for 2 seconds. The word 'REC' appears on the left
side of the display.
2) Stabilize the measuring module on the first measuring point and shortly
press HOLD to keep the data. After that you hear a series of bleeps.
Wait until these are finished before you move the module to the next
measuring point.
3) Shortly press the REC-key to show the average as well as the highest
and bottom rate of the series of measurements. After shortly pressing
the REC-key the letters 'AVG' (average), 'MIN' and 'MAX' will be shown
on the display.
4) Press the REC-key for 2 seconds to leave this function. The calculated
figures remain saved until you press the HOLD-key after recalling the
REC-function.
Value display
ZipLevel Plus 30
11
GB
Advertisement
