Preparing The Water Block For Instalation - EK Quantum Vector2 RE RTX 3080 ABP Set D-RGB User Manual

PREPARING THE WATER BLOCK FOR INSTALATION

DO NOT
REMOVE THIS
TERMINAL
BADGE!
DIN7984 M4 x 20
SCREW (3x)
TERMINAL
BADGE
Your water block set includes the water block and the active
backplate.
STEP 1
First, remove the terminal badge attached to the terminal via two
magnets. There are three (3) DIN7984 M4x20 screws under the
badge. Unscrew all three. Unscrew five (5) AX1 M3x10 screws as
shown in the image.
DO NOT REMOVE THE UPPER TERMINAL BADGE!
For this step you will need:
M3 x 10 AX1
SCREW (5x)
STEP 1
- 9 -
Phillips Head Allen Key
Screwdriver 2.5mm