Advertisement
Instruction Manual IB015002EN
Effective November 2021
Safety measures
This publication contains instructions on the installation of Eaton
brand Pow-R-Line low voltage distribution switchboards from Eaton's
Electrical business . Any person or persons that design, purchase,
install, operate or maintain new systems utilizing these products must
understand the equipment, its markings and limitations .
Hazardous voltages in distribution switchboards and all other electrical
equipment pose a potential hazard to life and property . Please
follow instructions, labeling and applicable codes and standards for
installation, maintenance and operation of this equipment and its
components .
Only "Qualified Persons" should install and/or service this equipment .
C22 .1 Canadian Electrical Code
Person" as "One who has skills and knowledge related to the
construction and operation of electrical equipment and installations
and has received safety training on the hazards involved . "
Standard symbols have been established for recognition of potentially
hazardous situations and conditions . Please review and understand
the critical warning symbols shown below . These symbols will appear
on safety labels affixed to the product . Installer should always read
and understand these labels before working on equipment .
Symbol
Meaning
The addition of either symbol to a "Danger"
or "Warning" safety label indicates that an electrical
hazard exists which will result in personal injury if the
instructions are not followed
This is the safety alert symbol. It is used to alert you to
potential personal hazards. Obey all safety messages
that follow this symbol to avoid possible injury and
death.
"DANGER" INDICATES AN IMMINENTLY HAZARDOUS SITUATION
WHICH, IF NOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS INJURY.
"WARNING" INDICATES A POTENTIALLY HAZARDOUS SITUATION
WHICH, IF NOT AVOIDED, CAN RESULT IN DEATH OR SERIOUS INJURY.
"CAUTION" INDICATES A POTENTIALLY HAZARDOUS SITUATION
WHICH, IF NOT AVOIDED, CAN RESULT IN MINOR OR MODERATE
INJURY.
"CAUTION", USED WITHOUT THE SAFETY ALERT SYMBOL, INDICATES
A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, CAN
RESULT IN PROPERTY DAMAGE.
2
EATON www.EatonCanada.ca/PRLCS
®
(CEC) Part 1 defines a "Qualified
DANGER
WARNING
CAUTION
CAUTION
Eaton Corporation's liability for any errors or omissions in this
document is limited to the documentary correction of errors . Eaton
®
will not be responsible in any event for errors or omissions in this
document or for any damages, incidental or consequential (including
monetary losses), that might arise from the use of this document or
the information contained in it . Information in this publication is not
intended for use as a training manual for non-qualified personnel .
The information or statements in this publication concerning the
suitability, capacity or performance of the switchboard(s) may not
cover all configurations of this custom built product . Eaton has
made all reasonable efforts to ensure that the instructions in this
document are adequate and free of material errors and omissions .
Eaton will, if necessary, explain issues, which may not be covered by
the document . The information contained in the Instruction Leaflet is
subject to change without notice .
Introduction
This instruction manual is designed to supplement other industry
standards including all local, provincial and federal codes and safety
regulations, such as OSHA . (C22 .1 Canadian Electrical Code) .
Operation and Maintenance of Dead- front Distribution Switchboards
Rated 600 Volts and Less, other workplace, electrical installation
requirements and all safety rules .
Safety
Due to the weight and size of switchboards and dangers from
electrical hazards, every precaution should be tak en to maintain
safe working conditions when handling this equipment . Due to the
custom nature of switchboards and the site variables, every potential
situation cannot be anticipated . Safety must always be the overriding
factor .
Pow-R-Line CS switchboards
Advertisement
