Fluke VIBGUARD compact Manual page 25

To do so, press the bottom of the system module upward with your hand.
l
Tilt the system module forward slightly and remove it from the top hat rail.
Take the PE terminal off of the top hat rail:
l
To do so, pull the locking lever downward using a suitable screwdriver and then remove the PE ter-
l
minal. The PE terminal remains connected to the power supply via the protective conductor.
Take the power supply (1T1) off of the top hat rail:
l
To do so, press the locking lever inward and then pull the power supply upward to remove it.
l
VIBGUARD compact
Installation and Operation
25