System Module - Fluke VIBGUARD compact Manual

Installation and Operation

4.1 System module

VIB 7.900
PE : Protective earth terminal connected to PE terminal; used for contacting the system hou-
1
sing, contacting the Ethernet socket.
24V 1, PG 1 : Connection for the system module supply.
2
24V 2 / 24V 3 : Supply for the accessories.
SYSTEM, EVENT : LEDs for system status and event recorder.
3
RESET :System reset button.
4
RS232 : Serial interface for service.
5
Connection terminals for voltage signals/vibration sensors ( AI1 to AI6 ) and for RPM sensor ( TP )
6
incl. status LEDs.
Connection terminals for digital input signal ( DI ), system OK relay ( SYS ) and relay output ( NO )
7
incl. status LEDs.
LAN : Ethernet connection with status LEDs ( LINK, ACT ) for data traffic.
8
IP PRESET : Button for standard IP configuration.
9
LED displays on the system module
Analog inputs / tachometer pulse input
LED status
Off
18
Schnittstellen, Anzeige- und Bedienelemente
AI1 ... AI6
Channel not configured
Sensor fault
Edition: 10.2018