Adjustments Procedure References; Source Voltage Adjustment; Equipment; Setup - Agilent Technologies 4339B Service Manual

Adjustments Procedure References

This section provides supplemental information for the adjustments which are performed by
the program. Connection instructions and some additional explanations are provided. Use this
chapter as a reference when you perform the adjustments.

Source Voltage Adjustment

This adjustment updates the voltage source adjustment data stored in the EEPROM.

Equipment

To avoid the electrical shock hazard by eventual touch, use only the
Warning
11058A for connection. Each of the jumper's banana plug conductor is
equipped with an retractive protective sleeve.

Setup

This setup obtains the data to adjust the actual source output voltage equal to the set value.
2-6 Adjustments
Multimeter
Banana-Banana Jumper
V Measurement Adapter
Shunt Connector
Figure 2-2. Source Voltage Adjustment Setup
3458A
11058A
Agilent PN 04339-65006
Agilent PN 04339-60003