Table of Contents
Advertisement
▪
Chose and connect the adapter suitable for the prescript maximum pressure of the compressor
charging panel (300 or 200 bars). When using the BAT kit on a gas cylinder, you can skip this
step.
Figure 3: Screwing the adapter on the pressure reducer.
▪
Connect pressure reducer to compressed gas cylinder, or to charging
connection of compressor using the 200 or 300 bar adapter.
▪
Insert and firmly fit the nozzle of manifold on the pressure reducer as shown in fig. 5.
Figure 5: Connecting manifold to the pressure reducer
●
WatchGas B.V.
●
●
Klaverbaan 121, 2908KD, Capelle a/d IJssel, The Netherlands
T: +31 (0) 85 0187709
●
info@watchgas.eu
Figure 4: Pressure reducer
●
●
www.watchgas.eu
9
Advertisement
Table of Contents
