QGM Multi Gas Detector User Manual D e t e c t i o n D e t e c t i o n Contents Contents Description Warning Caution Product Overview Activation Switch On Switch Off Mode Measuring Mode Display Mode 3.2.1...
D e t e c t i o n Description The QGM is a portable multigas monitor designed to warn the user about the presence of dangerous gases in the atmosphere. The detector indicates the concentration of 4 types of gases (oxygen, carbon monoxide, hydrogen sulfide, combustible gas) simultaneously on the LCD monitor.
QGM Multi Gas Detector User Manual D e t e c t i o n D e t e c t i o n 1. Product Overview DETECTOR COMPONENTS Gas Sensor (O Gas Sensor (LEL) Gas Sensor (Dual: CO & H...
User Manual Multi Gas Detector QGM D e t e c t i o n D e t e c t i o n 2. Activation 2.1 SWITCH ON Press and hold down the KEY button ( ) for three seconds, after the three second countdown the monitor will turn on.
QGM Multi Gas Detector User Manual D e t e c t i o n D e t e c t i o n Mode 3.1. MEASURING MODE If the device goes into the normal measuring mode after stabilizing, the gas concentration and the battery power level are displayed on the LCD monitor.
User Manual Multi Gas Detector QGM D e t e c t i o n D e t e c t i o n 3.2.1 DISPLAY MODE IN DETAIL Measuring Mode (Basic Display) Display the current gas levels of the atmosphere and the battery power level Shows the minimum concentration in this session for the Oxygen sensor.
Bump Test Interval (WATCHGAS IR-LINK Options): Notices the user on a regular basis to check the device. Calibration Interval (WATCHGAS IR-LINK Options): Notices the user on a regular basis to calibrate the sensor.
STEL 50 ppm 15 ppm The set values can be modified on PC through the optional WATCHGAS IR-LINK. Caution The values of different gases in the device are set based on the international standards. As such, the alarm set-off values for each gas can be modified upon the approval and monitoring of the supervisor.
Press the KEY button ( ) again for 3 seconds under the (D/T) mode and it will go back to previ- ous mode. * The current time shall be automatically synched with that of the PC when linked with WATCHGAS IR- LINK. 3.7.
Up to 30 events may be saved and when the list exceeds 30, the oldest data will be automatically dele- ted. The saved data can be checked when transmitting it to PC through WATCHGAS IR-LINK. Data log records the operation status every second and normal data logs do not last more than 2 months.
3 seconds. If FA continues, please consult Watchgas or the store you purchased the device as it may require the replacement of the sensor or repairs in the device.
Page 13
50 ppm Hydrogen Sulfide 10 ppm * The concentration for calibration may be modified on PC through the optional WATCHGAS IR-LINK. DOCKING STATION Standard gas calibration can be easily done through Docking Station (option), which holds gas inside. * Docking Station is used to determine whether the devices functions properly by the bump test before using QGM in the work site.
D e t e c t i o n 7. Limited Warranty WATCHGAS warrants this product to be free of defects in workmanship and materials-under normal use and service-for two years from the date of purchase from the manufacturer or from the product’s authorized reseller.