Page 1
Compliance Kiosk Quick Start Guide Compliance Kiosk | QSG | V 1.0 | EN | 26-06-23...
Page 2
CAUTIONS & BEST PRACTICES WARNING IMPORTANT SAFETY INFORMATION: • If the Compliance Kiosk appears to be damaged or is not READ FIRST functioning properly, please contact WatchGas or a local WatchGas distributor. • Avoid the station encountering liquids. Compliance Kiosk •...
Ensure internet connectivity either by WIFI or installing a SIM for Cellular connection. INTRODUCTION The WatchGas Compliance Kiosk works as a terminal to allow the user to check-in the gas detector and provides a full overview of the device status including any unreported events. The WatchGas compliance Kiosk automatically sends all data to a designated software site, providing a cost effective overview of fleet health, predictive maintenance, events and alarms.
Page 4
See drawings below. Wall Mounting The provided mounting brackets can be used to mount the Compliance Kiosk to a wall or table. WatchGas recommends checking the strength of the mounting area and selecting the proper mounting hardware before mounting the Compliance Kiosk. Mounting the Compliance Kiosk should be performed by a qualified installation contractor.
ENTER SET UP Click upper left icon and Setup Menu Saved Configuration Files: Select Unit type and enter password. Setting up reference files model. to compare gas detectors against.
Page 6
File Function Event Log Menu Compliance Reader Setup Application Setting To set the file for use Shows all units checked To enable the software Flush Application Data cleans unneeded for compliance and the in event list. activation, enter the Site data after 30 days.
Kiosk screen for actions. Activate the NFC on the detector. Exit the compliance check. Note the action here. Tap the detector to the Compliance Kiosk by means After confirming if of inserting in the clip holder. needed. Exit the compliance...
SPECIFICATIONS Dimensions (LxWxH) 28 x 21 x 4 cm (11 x 8.25 x 1.5 in) Weight 800 g (1.76 lb) Operating Temperature +5-40 °C (40-104°F) Humidity 10% to 90% RH Storage Temperature 0-50 °C (32-120°F) USB C 5V Power Supply Real Time Clock Yes, updatable Data Storage...
The best practices for maintenance are to perform routine firmware updates. The WatchGas Com- pliance Kiosk can be cleaned with a soft, damp cloth. Do not use solvents, soaps, polishes, or immerse the WatchGas Compliance Kiosk in liquids. Completely turn off unit and disconnect power supply before cleaning.