Table of Contents
Advertisement
5.2 Measuring on Compressed Gas Cylinders
(for measuring on compressors go to 5.3)
▪
Slowly open cylinder valve.
▪
The flow rate of air through each port of manifold can be confirmed if necessary by using the
flow meter provided with the kit. (To measure the flow rate connect tubing of flow meter to the
desired manifold port- Fig. 6)
Figure 6: Checking the outlet flow with the flow meter
▪
Insert the detector tube holders in the manifold ports- Fig. 7.
Figure 7: Connecting rubber tube holders to the manifold
▪
Flush device for sufficient time to make the test device free from other gases if any.
●
WatchGas B.V.
●
T: +31 (0) 85 0187709
●
Klaverbaan 121, 2908KD, Capelle a/d IJssel, The Netherlands
●
info@watchgas.eu
●
●
www.watchgas.eu
10
Advertisement
Table of Contents
