Safety Instructions; Standards And Regulations - VWR PCR Instruction Manual

S I
AFETY NSTRUCTIONS
Please read the entire instruction manual before operating the VWR
Incubating/Cooling Shaker.
WARNING! DO NOT use the Incubating/Cooling Shaker in a
hazardous atmosphere or with hazardous materials for which
the unit was not designed. Also, the user should be aware that
the protection provided by the equipment may be impaired if
used with accessories not provided or recommended by the
manufacturer, or used in a manner not specified by the
manufacturer.
DO NOT lift unit by the tray or lid. Always operate unit on a level
surface for best performance and maximum safety.
CAUTION! To avoid electrical shock, completely cut off power
to the unit by disconnecting the power cord from the unit or
unplug from the wall outlet. Disconnect unit from the power
supply prior to maintenance and servicing.
Spills should be removed promptly. DO NOT immerse the unit for
cleaning. DO NOT operate the unit if it shows signs of electrical
or mechanical damage.
Earth Ground - Protective Conductor Terminal
Alternating Current
Pinch Point - Keep fingers clear during operation.
3
S & R
TANDARDS EGULATIONS
Henry Troemner LLC hereby declares under it's sole responsibility that
the construction of this product conforms in accordance with the
following standards:
Safety standards:
IEC 61010-1 Safety requirements for electrical equipment
for measurement, control and laboratory use.
Part I: General Requirements.
IEC 61010-010-04 Part II: Particular requirements for laboratory
equipment for the heating of materials.
IEC 61010-2-051-04 Part II: Particular requirements for laboratory
equipment for mixing and stirring.
UL Std. No. 61010-1
CSA/CAN C22.2 No. 0-M91
CSA/CAN C22.2 No. 61010-1-04
EMC standards:
FCC-B EN61000-3-2/3-3
EN61000-4-2 EN61000-4-3
EN61000-4-4 EN61000-4-5
EN61000-4-6 EN61000-4-11
CISPR 11 IEC61326-2005
Associated EU guidelines:
EMC directive 2004/108/EC
LVD directive 2006/95/EC