Table of Contents
Advertisement
9
4.
PRODUCT INSTALLATION
4.1
SELECT INSTALLATION LOCATION
To select a location for the inverter, the following criteria should be considered:
WARNING: Risk of re
Do not install the inverter in areas containing highly ammable materials or gases.
Do not install the inverter in potentially explosive atmospheres.
Do not install in small closed spaces where air can not circulate freely. To avoid overheating,
always make sure the ow of air around the inverter is not blocked.
Exposure to direct sunlight will increase the operational temperature of the inverter and
may cause output power limiting. It is recommended that inverter installed to avoid direct
sunlight or raining.
To avoid overheating ambient air temperature must be considered when choosing the
inverter installation location. It is recommended that using a sun shade minimizing direct
sunlight when the ambient air temperature around the unit exceeds 100°F/40℃.
Hymon Fotowoltaika Sp z o.o.
ul. Dojazd 16A 33-100 Tarnów
Pic 4.1 Recommended installation place
Wyłączny dystrybutor nowoczesnych systemów
www.hymon.pl
Hide quick links:
Advertisement
Table of Contents
