Blaupunkt BPT-V03-12 User Manual page 43

43
Error code
F56
DC busbar voltage is too low
F57
AC reverse irrigation
F58
AC grid U over current
F59
AC grid V over current
F60
AC grid W over current
F61
Reactor A phase over current
F62
Reactor B phase over current
F63
Reactor C phase over current
F64
IGBT heat sink high temperature
Note:
If your string inverter has any of the fault information shown in Table 10-1, and when you reset the machine
and still don't solve the problem,please contact our distributor and provide the below details:
1. Serial number of the inverter;
2. The distributor/dealer of the inverter(if available);
3. Installation date;
4. The discription of problem(include LCD'error code and LED starus indicator lights);
5. Your contact details.
Hymon Fotowoltaika Sp z o.o.
ul. Dojazd 16A 33-100 Tarnów
Description
Table10.1 Error codes and their solutions
Ongrid - Three Phase
1. It tells the PV input voltage is low and it always happens in the
early morning.
2. Check PV voltage and Ubus voltage. When inverter is running,
then showing F56, maybe Loss of driver or need update
rmware.
3. Restart the inverter, if the fault still exists, contact your
installer or Deye service.
AC reverse irrigation.
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
1. Check temperature sensor. Check if rmware is suitable for
the hardware. Check if the inverter is its right model.
2. Restart the inverter, if the fault still exists, contact your
installer or Deye service.
Wyłączny dystrybutor nowoczesnych systemów
www.hymon.pl