34
8.2.3
ON/OFF SETTING
When the inverter is turned o , it stops working immediately, and go to standby mode and then will go to self-test
program again. If it passed the self-test, it will start to work again.
8.2.5
PARAMETER SETTING
There are ve submenus in the setup.Setting includes system param, run param, protect param, comm: param. All of these
information for maintenance reference.
Hymon Fotowoltaika Sp z o.o.
ul. Dojazd 16A 33-100 Tarnów
Pic 8.15 ON/OFF setting
Pic 8.17 Submenus of the parameter setup
Wyłączny dystrybutor nowoczesnych systemów
www.hymon.pl