Blaupunkt BPT-V03-12 User Manual page 42

42
Error code
F36
AC grid phase error
AC three-phase voltage unbalance
F37
failure
AC three-phase current unbalance
F38
failure
F39
AC over current(one cycle)
F40
DC over current
F41
AC Line W,U over voltage
F42
AC Line W,U low voltage
F43
AC Line V,W over voltage
F44
AC Line V,W low voltage
F45
AC Line U,V over voltage
F46
AC Line U,V low voltage
F47
AC Over frequency
F48
AC lower frequency
U phase grid current DC
F49
component over current
V phase grid current DC
F50
component over current
W phase grid current DC
F51
component over current
AC inductor A, phase current
F52
DC current high
AC inductor B, phase current
F53
DC current high
AC inductor C, phase current
F54
DC current high
F55
DC busbar voltage is too high
Hymon Fotowoltaika Sp z o.o.
ul. Dojazd 16A 33-100 Tarnów
Description Ongrid - Three Phase
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
1. Check AC current sensor and its circuit.
2. Restart the inverter, if the fault still exists, contact your
installer or Deye service.
Hardly appear the code. Never ever happened so far.
Check the AC voltage protection setting. And Check if the AC
cable is too thin.Check the voltage di erence between LCD and
meter.
Check the AC voltage protection setting. Check the voltage
di erence between LCD and meter. Also need to check whether
AC cables are all rmly and correctly connected.
Check the AC voltage protection setting.And Check if the AC
cable is too thin.Check the voltage di erence between LCD and
meter.
Check the AC voltage protection setting. Check the voltage
di erence between LCD and meter. Also need to check whether
AC cables are all rmly and correctly connected.
Check the AC voltage protection setting.And Check if the AC
cable is too thin.Check the voltage di erence between LCD and
meter.
Check the AC voltage protection setting.
Check the frequency protection setting.
Check the frequency protection setting.
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
Hardly appear the code. Never ever happened so far.
1. Check PV voltage and Ubus voltage and its detection circuit.
If the PV input voltage exceeds the limit, please reduce the
number of solar panels in series.
2. For Ubus voltage, please check the LCD display.
Wyłączny dystrybutor nowoczesnych systemów
www.hymon.pl