16
Step 4: Use the hexagon screwdriver, loosen the bolts of the socket in turn, and insert each cable core into the
corresponding jack, and set each screw. The connection hole of AC connection terminal labeling is shown in Picture 5.9.
Step 5: Set the sleeve and sealing ring in place.
Step 6: Connect the terminals to the inverter as shown in picture 5.10.
Hymon Fotowoltaika Sp z o.o.
ul. Dojazd 16A 33-100 Tarnów
Pic 5.9 AC Connector Hole Pattern
ON
OFF
DC SWITCH
Pic 5.10 AC input connection
RS232/485
RS485
limiter
Wyłączny dystrybutor nowoczesnych systemów
www.hymon.pl