Table of Contents
Advertisement
12
PROCEDURE SHOWS BELOW:
1. Locate on the appropriate wall according to the bolt position on the mounting bracket, then mark the hole. On the
brick wall, the installation must be suitable for the expansion bolt installation.
2. Ensure that the position of the installation holes on the wall is in accordance with the mounting plate, and the
mounting rack is horizontally placed.
3. Hang the inverter to the top of the mounting rack and then use the M4 screw in the accessory to lock inverter heat
sink to the hanging plate, to ensure that the inverter will not move.
Hymon Fotowoltaika Sp z o.o.
ul. Dojazd 16A 33-100 Tarnów
Pic 4.5 Inverter hanging plate installation
Pic 4.6 Inverter installation
Wyłączny dystrybutor nowoczesnych systemów
www.hymon.pl
Hide quick links:
Advertisement
Table of Contents
