Service And Care; Warranty - DT SWISS L2 User Manual

5. SERVICE AND CARE

Task
Check if the fastening is correct
Check the functionality
Clean with soft cloth and a suitable cleaner.
Do not use high pressure cleaners or aggressive cleaning agents!
Clean and lightly grease the track of the grid (see chapter 5.1).
Check for damage.
5.1 CLEANING AND GREASING THE TRACK OF THE GRID
1. Push the lower lever fully forward to access the
track of the grid.
2. Clean the track with water and a mild
detergent.
3. Grease the track with universal grease.
4. Operate the lever a few times and remove
excess grease.
5.2 DISPOSAL AND ENVIRONMENTAL PROTECTION
The statutory regulations shall apply. Whenever possible, avoid creating waste. Waste, especially
carbon, lubricants, cleaners and any other fluids must be disposed in an environmentally compatible
manner.

6. WARRANTY

Warranty conditions can be found at www.dtswiss.com
14
Interval
before each ride
Before each ride
After each ride
regularly
regularly