Installation And Connection; Power Connection; Video Signal Connection; Network Connection - Kiloview NDI E Series User Manual

E Series NDI Encoder·User Manual

4 Installation and connection

4.1 Power connection

Using the power adapter (DC 12v) to connect to the power connector of the device. After connected,
turn on the power switch (Interface No.12) on the device. After the device is powered on, it starts
working
Note: Please use the standard power adapter provided. Using other unqualified power
supplies may damage the device.

4.2 Video signal connection

Connect the SDI/HDMI signal from a source (such as a camera) to the input port of the device through a
cable,make sure the connection is tightened.

4.3 Network connection

Connect the network cable to the Ethernet port of the device, and connect the other end to the network
switch or directly to the network port of the computer.
Copyright © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
6