Advertisement
2. Device installation and Connection
2.1. Card installation and device connection
1) Card installation
Align the card assembly with the card slots and push in parallel, then tighten the
double-sided screws.
Device connection
2)
Ethernet interface
HDMI IN
Ethernet interface
SDI IN
2.2. Device login
1) Default IP address
The default IP address is 192.168.1.168 with subnet mask 255.255.255.0.
Normally, you don't need to modify this IP address.
1. Align and push the encoding card in
2. Tighten the left and right screws
Camera
PC
HDMI OUT
PC
Camera
SDI OUT
Display screen
Monitor
AC input
AC input
Advertisement
