Smart Card Reader - HP EliteBook 630 Maintenance And Service Manual

4. Remove the power connector cable from the computer (4).
Reverse this procedure to install the power connector cable.

Smart card reader

To remove the smart card reader from the top cover, use this procedure and illustration.
Table 6-11 Smart card reader description and part number
Description
Smart card reader
Before removing the smart card reader, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the left speaker (see
Remove the smart card reader:
1. Remove the four Phillips M2.0 × 2.0 screws (1) from the metal bracket covering the card reader board.
2. Disconnect the cable from the card reader (2).
56 Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 44).
Speaker on page 46).
37).
Spare part number
M21398-001
37).