Computer Setup (Bios), Tpm, And Hp Sure Start; Using Computer Setup; Navigating And Selecting In Computer Setup; Restoring Factory Settings In Computer Setup - HP EliteBook 630 Maintenance And Service Manual

7 Computer Setup (BIOS), TPM, and HP Sure
Start
HP provides several tools to help set up and protect your computer.

Using Computer Setup

Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as hard drives, display, keyboard, mouse, and printer). Computer Setup
includes settings for types of devices installed, the startup sequence of the computer, and amount of system
and extended memory.
NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the computer from
operating properly.
To start Computer Setup, turn on or restart the computer, and when the HP logo appears, press
Computer Setup.

Navigating and selecting in Computer Setup

You can navigate and select in Computer Setup using one or more methods.
To select a menu or a menu item, use the
●
use a pointing device to select the item.
To scroll up and down, select the up arrow or the down arrow in the upper-right corner of the screen, or
●
use the up arrow key or the down arrow key on the keyboard.
To close open dialog boxes and return to the main Computer Setup screen, press esc, and then follow the
●
on-screen instructions.
To exit Computer Setup, choose one of the following methods:
To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and Exit,
●
and then select Yes.
NOTE: If you are using arrow keys to highlight your choice, you must then press enter.
To save your changes and exit Computer Setup menus, select Main, select Save Changes and Exit, and
●
then select Yes.
NOTE: If you are using arrow keys to highlight your choice, you must then press enter.
Your changes go into effect when the computer restarts.

Restoring factory settings in Computer Setup

To return all settings in Computer Setup to the values that were set at the factory, follow these steps.
tab key and the keyboard arrow keys and then press enter, or

Computer Setup (BIOS), TPM, and HP Sure Start

f10 to enter
67